China Best Car Ignition Manufacturers – Door Handle OEM No.9017600359,9017600459,9017600461 – Lanwo

Description

The design of car door handles of different brands is also different. The door handles used in cars are divided into two types: solid door handles and hollow door handles. The characteristic of solid door handles is that the door handles are thicker. This is the earliest product, hollow door handles. The handle is designed to hollow out the back of the door handle, which improves the deformation and bending problem of the handle.

If the door handle does not return smoothly, the door handle may be lack of lubricant or the door handle spring may be faulty.

The design of car door handles of different brands is also different. The door handles used in cars are divided into two types: solid door handles and hollow door handles. The characteristic of solid door handles is that the door handles are thicker. This is the earliest product, hollow door handles. The handle is designed to hollow out the back of the door handle, which improves the deformation and bending problem of the handle.

The hollow door handle can overcome the problem of deformation and shrinkage, while enhancing the safety of the door handle, while reducing the manufacturing cost of the car.

In the process of using the car, because the door handle is used more frequently, it may be because the door handle is used for a long time, and the dust accumulates in the door handle. There is a spring inside the door handle, which is a return spring. If the handle is used for a long time, the return tension of the spring is not enough, which will also cause the spring not to return.

If it is a new car, it is recommended to go to the 4S shop where you purchased the car for inspection in time, and you can apply for a refund if necessary. If it is caused by the aging of the spring, it is recommended that the owner replace the return spring in the door handle, and it can be used normally after replacement.

Dry door handle how to oil

The specific operation steps for oiling the door handle are as follows:

1. Use a screwdriver to insert a screwdriver into the small square opening under the decorative cover of the door handle and turn it to pry off the decorative cover of the door handle.

2. After prying off the decorative cover of the door handle, use a screwdriver to pry off the circular sealing rubber inside, and turn the screw to disassemble it.

3. After removing the screws inside, remove the lock block of the door handle.

4. Gently pull the door handle outward, so that the door handle will be separated from the door, and then apply lubricating oil to the dry parts such as the door handle and screws to re-lubricate them.

5. After lubricating, you can reinstall it in the reverse order of disassembling the door handle.